9V battery cable (flex6)

Cioks 9V battery clip cables in 30-50cm lenghts
800Ft (630Ft+ÁFA)

C-negative cables (flex1)

Cioks center-negative 5,5/2,1mm DC cable 30-50-80cm lenghts
800Ft (630Ft+ÁFA)

C-positive cables (flex2)

Cioks center-positive 5,5/2,1mm DC cables in 30-50cm lenghts
800Ft (630Ft+ÁFA)

Tip-positive cables (flex5)

Cioks Tip-Positive 3,5mm jack cables in 30-50cm lengths
800Ft (630Ft+ÁFA)

2-pin DIN plug cable (flex7)

Type 7 plug - blue 2-pin DIN plug (also known from older speakers), at this point only used in vacuum tube pedals from Electro Harmonix powered by 12V AC. Available in 50cm length, this type 7 Flex cable is included in the box when buying an AC Rider power supply, which exactly has an outlet with 12V AC dedicated for this pedal type.
800Ft (630Ft+ÁFA)

Booster flex cable (c-boost)

With Booster Flex it's easy to make 18V from a single 9V outlet. It's equipped with a step-up converter in the mould placed in the middle of the cable. When you connect the Booster Flex to a 9V outlet, you'll obtain 18V on the other end, which is a type 1 plug - a black 5.5/2.1mm centre negative DC-plug. The most common application is for 18V Wah pedals or the bigger MXR pedals needing 18V. Remember that the maximum current the Booster Flex can deliver is 50mA. BE CAREFUL when using Booster Flex. There is a risk of damaging one of your 9V pedals by powering it with too high a voltage. Check the specifications of the pedal and if you still have some questions, you're welcome to send an e-mail
9.600Ft (7.559Ft+ÁFA)

C-positive 2,5mm cable (flex4)

Type 4 plug - green 5.5/2.5mm centre positive DC-plug, mainly used in the large modeling pedals from Line 6, pedals from Electro Harmonix designed for 18, 24 or 40V or the red Whammy from DigiTech in two lengths: 30 and 50cm.
800Ft (630Ft+ÁFA)

Cioks AC Rider (ACRider)

CIOKS AC RIDER - 2x9V DC isolated + 2x9V DC isolated + 1x9V AC & 1x12V AC isolated(DigiTech Whammy, Line6 modelling pedals, EH tube pedals,etc) -3 status indicator LED -all outlets are overload and short circuit protected -2m mains cable -1x7050 Flex 2 pin DIN cable included -dimensions:130x70x40mm -weight:520g -4 DC C- cables and 2 DC C+ cables included 2 years warranty FREE Shipping to any EU country above 200,-Euro of order
29.000Ft (22.835Ft+ÁFA)

Cioks AC10 (ac10)

AC10 is a member of CIOKS brand new professional range of dedicated multi-output power supplies for effect pedals. Its two powerful AC sections with 800mA each offer voltages 9, 12 and 16V AC. If you have one or two pedals in your setup, which requires an AC power source, AC10 is the right choice. It powers all vacuum tube pedals from Electro-Harmonix, Blackstar HT series, the Whammy or JamMan from DigiTech, Tube Rotosphere, Tubeman, Tube Factor or Replex from Hughes & Kettner or EBS Valve Drive just to mention a few. If you only have one AC pedal, you can convert one of the AC sections into a powerful DC section offering 600mA with voltages 9, 12 and 15V DC. The first 4 outlets offering 600mA are perfect for pedals using 9 or 12V DC at lower currents op to 200mA.
66.000Ft (51.969Ft+ÁFA)

Cioks AC8 (ac8)

AC8 is a professional medium sized dedicated multi-output power supply for effect pedals. It's a perfect solution for small or medium size rigs with a single pedal which requires an AC power source. Outlet 7 or 8 will power your vacuum tube pedal from Electro-Harmonix, Hughes & Kettner or Kingsley, the Whammy or JamMan from DigiTech, or other pedal which requires 9 or 12V AC. The first 6 outlets offering 400mA are ideal for pedals using 9 or 12V DC at lower currents op to 100mA. Combined with the included Stack Flex the AC8 will also power your 18 or 24V pedal. 9 or 12V DC at lower currents op to 200mA.
54.500Ft (42.913Ft+ÁFA)

Cioks BABY Mach2 4x9V DC/200mA + 1x9V DC/100mA (baby-mach2)

Baby Mach2 4x9V DC/200mA + 1x9V DC/100mA power supply -status led indicator -overload and short circuit protected -2m mains cable Specifications: Outlet 1-4: 9V DC / 200mA total from all 4 outlets (regulated) Outlet 5: 9V DC / 100mA 5 pcs of DC cables included Size: 100x60x40mm Weight: 420g 2 years warranty FREE Shipping to any EU country above 200,-Euro of order
21.000Ft (16.535Ft+ÁFA)

Cioks BIG JOHN 7x9V DC/600mA (bigjohn)

CIOKS BIG JOHN - 7x9V DC/600mA -status indicator led -overload and short circuit protected -2m mains cable -size:130x75x40mm -size:130x75x40mm -weight:520g -7 DC cables included 2 years warranty FREE Shipping to any EU country above 200,-Euro of order
25.000Ft (19.685Ft+ÁFA)

Cioks DC10 (dc10)

DC10 is a member of CIOKS brand new professional range of dedicated multi-output power supplies for effect pedals. It has 10 regulated and well filtered DC outlets configured in 8 isolated sections. With a total of 1.600mA it's a perfect solution for bigger rigs only with pedals using a DC power source. Its three powerful sections with 400mA each will power pedals with special requirements like those from TC Electronic Nova series, Eventide Factor series, MoogerFoogers, Radial Tonebone or others without the need of custom cables. Selectable with a switch DC10 offers voltages 9, 12 and 15V DC, and combined with one of the included Stack Flex also 18 and 24V DC. The first 4 outlets offering 4x100mA are perfect for standard 9V battery operated pedals.
66.000Ft (51.969Ft+ÁFA)

Cioks DC8 (dc8)

DC8 is a professional medium sized dedicated multi-output power supply for effect pedals. It has 8 regulated and well filtered DC outlets configured in 6 isolated sections. With a total of 1.000mA it's a perfect solution for small or medium size rigs with pedals only using a DC power source. Its two powerful sections with 300mA each will power pedals like TC Electronic Novas, Eventide Factors, the digital BOSS or Electro-Harmonix pedals or others which draw a higher current than 100mA. The first 4 isolated outlets offering 4x100mA are ideal for 9 or 12V pedals needing less than 100mA. Combined with the included Stack Flex the DC8 will also power your 18 or 24V pedal.
54.500Ft (42.913Ft+ÁFA)

Cioks Double Jack 5x9V+2x12V DC/600mA (Doublejack)

CIOKS DOUBLE JACK - 5x9v & 2x12V DC/600mA -status indicator LED -overload and short circuit protected -2m mains cable -dimensions:130x70x40mm -weight:520g -7 DC cables included 2 years warranty FREE Shipping to any EU country above 200,-Euro of order
29.000Ft (22.835Ft+ÁFA)

Cioks POWER BITCH (Powerbitch)

CIOKS POWER BITCH - 3x9V DC + 1x18V DC(Dunlop&MXR) +1x24V DC(Electro-Harmonix) + 1x40V DC(Electro-Harmonix) -4 LED status indicators, one for each section -all outlets are overload and short circuit protected -2m mains cable -dimensions:130x70x40mm -6 DC cables included -weight:520g Outlet 1-3: 9V DC / 150mA total from all 3 outlets (regulated) Outlet 4: 18V DC / 80mA (regulated) Outlet 5: 24V DC / 60mA (*not regulated) Outlet 6: 40V DC / 60mA (*not regulated) 2 years warranty FREE Shipping to any EU country above 200,-Euro of order
29.000Ft (22.835Ft+ÁFA)

Cioks SCHIZOPHRENIC (Schizo)

CIOKS SCHIZOPHRENIC - 5x9V/12V switchable DC isolated + 1x18V DC fix or 4-14V DC adjustable isolated outlets -all 6 outlets fully isolated, regulated and well filtered -outlet 1-5 with either 9 or 12V -outlet 6 with either fixed 18V or adjustable in the range 4-14V -possibility for connecting 24V or 40V pedals with Stack Flex -all outlets are overload and short circuit protected -2m mains cable -6 DC cables included -dimensions:130x70x40mm -weight:520g 2 years warranty FREE Shipping to any EU country above 200,-Euro of order
36.000Ft (28.346Ft+ÁFA)

Cioks TC10 (tc10)

TC10 is a member of CIOKS brand new professional range of dedicated multi-output power supplies for effect pedals. The Danish company TC Electronic is very popular with their Nova pedal series for guitar players and TC‑Helicon VoiceTone series for vocalists. CIOKS TC10 power supply is with its 10 regulated and well filtered DC outlets configured in 8 isolated sections specially designed for musicians who are big fans of these TC boxes and is able to power four of them alongside with standard 9V pedals. Three sections offer 300mA each and the last yields 400mA with voltages 9 and 12V available. The first 4 outlets offering 4x100mA are perfect for standard 9V battery operated pedals.
66.000Ft (51.969Ft+ÁFA)

Split flex cable (flexy)

Split Flex gives you the possibility for connecting two pedals to the power supply using one outlet only. Two cables in lengths 30 and 50cm are connected to the plug on the power supply side. On the other end they are terminated with type 1 plugs - black 5.5/2.1 centre negative DC-plugs
1.700Ft (1.339Ft+ÁFA)

Stack flex type1 cable (flexstack1)

Stack Flex gives you the possibility of 'stacking'' two outlets on top of each other. By a series connection of the power supply's two outlets you'll end up with a higher voltage on the plug for your pedal. In the case of type 1 Stack Flex it's a black 5.5/2.1mm centre negative DC-plug. One of the power supply's two outlets used with the Stack Flex must be isolated.
1.700Ft (1.339Ft+ÁFA)

Stack flex type4 cable (flexstack2)

Stack Flex gives you the possibility of 'stacking' two outlets on top of each other. By a series connection of the power supply's two outlets you'll end up with a higher voltage on the plug for your pedal. In the case of type 4 Stack Flex it's a green 5.5/2.5mm centre positive DC-plug. One of the power supply's two outlets used with the Stack Flex must be isolated.
1.700Ft (1.339Ft+ÁFA)