9V battery cable (flex6)

Cioks 9V battery clip cables in 30-50cm lenghts
800Ft (630Ft+ÁFA)

C-negative cables (flex1)

Cioks center-negative 5,5/2,1mm DC cable 30-50-80cm lenghts
800Ft (630Ft+ÁFA)

C-positive cables (flex2)

Cioks center-positive 5,5/2,1mm DC cables in 30-50cm lenghts
800Ft (630Ft+ÁFA)

Tip-positive cables (flex5)

Cioks Tip-Positive 3,5mm jack cables in 30-50cm lengths
800Ft (630Ft+ÁFA)

2-pin DIN plug cable (flex7)

Type 7 plug - blue 2-pin DIN plug (also known from older speakers), at this point only used in vacuum tube pedals from Electro Harmonix powered by 12V AC. Available in 50cm length, this type 7 Flex cable is included in the box when buying an AC Rider power supply, which exactly has an outlet with 12V AC dedicated for this pedal type.
800Ft (630Ft+ÁFA)

Booster flex cable (c-boost)

With Booster Flex it's easy to make 18V from a single 9V outlet. It's equipped with a step-up converter in the mould placed in the middle of the cable. When you connect the Booster Flex to a 9V outlet, you'll obtain 18V on the other end, which is a type 1 plug - a black 5.5/2.1mm centre negative DC-plug. The most common application is for 18V Wah pedals or the bigger MXR pedals needing 18V. Remember that the maximum current the Booster Flex can deliver is 50mA. BE CAREFUL when using Booster Flex. There is a risk of damaging one of your 9V pedals by powering it with too high a voltage. Check the specifications of the pedal and if you still have some questions, you're welcome to send an e-mail
9.600Ft (7.559Ft+ÁFA)

C-positive 2,5mm cable (flex4)

Type 4 plug - green 5.5/2.5mm centre positive DC-plug, mainly used in the large modeling pedals from Line 6, pedals from Electro Harmonix designed for 18, 24 or 40V or the red Whammy from DigiTech in two lengths: 30 and 50cm.
800Ft (630Ft+ÁFA)

Split flex cable (flexy)

Split Flex gives you the possibility for connecting two pedals to the power supply using one outlet only. Two cables in lengths 30 and 50cm are connected to the plug on the power supply side. On the other end they are terminated with type 1 plugs - black 5.5/2.1 centre negative DC-plugs
1.700Ft (1.339Ft+ÁFA)

Stack flex type1 cable (flexstack1)

Stack Flex gives you the possibility of 'stacking'' two outlets on top of each other. By a series connection of the power supply's two outlets you'll end up with a higher voltage on the plug for your pedal. In the case of type 1 Stack Flex it's a black 5.5/2.1mm centre negative DC-plug. One of the power supply's two outlets used with the Stack Flex must be isolated.
1.700Ft (1.339Ft+ÁFA)

Stack flex type4 cable (flexstack2)

Stack Flex gives you the possibility of 'stacking' two outlets on top of each other. By a series connection of the power supply's two outlets you'll end up with a higher voltage on the plug for your pedal. In the case of type 4 Stack Flex it's a green 5.5/2.5mm centre positive DC-plug. One of the power supply's two outlets used with the Stack Flex must be isolated.
1.700Ft (1.339Ft+ÁFA)