CIOKS Power Factor 2 tápelosztó

CIOKS Power Factor 2 tápelosztó

A PowerFactor 2 a Cioks professzionális sorozatának egyik tápelosztója ami a legkülönbözőbb tápigényű pedálok egyidejű áramellátásohoz lett fejlesztve, kifejezetten az Eventide nagy tápigényű pedáljainak együttes használatára egyéb más pedálokkal egyidejűleg. PF2 is a member of CIOKS brand new professional range of dedicated multi-output power supplies for effect pedals. PowerFactor 2 features a toroidal transformer, selectable 120 or 230V mains input voltage, 8 isolated outlets with a total output current of 2.200mA at voltages 9 or 12V DC, all with an individual advanced LED monitoring feature and short circuit protection. It's based on the same design idea as CIOKS recently released LINK range of power supplies with a courtesy AC mains outlet and the link feature. The last four isolated outlets of the PowerFactor 2 are able to power four Eventide pedals of your choice. We recommend using 12V DC to power these and you should use the green type 4 Flex cables, where 4 of these are included in the box in different lengths. The last two outlets have a fixed 12V DC output voltage, where outlets 5 and 6 can be set to either 9 or 12V. For the Eventides please use the 12V setting. The 400mA outlets can of course beside Eventides also be used to power other high current pedals. The most popular ones at this moment are Strymon TimeLine and Mobius, Line6 M5 and all TC Electronic Nova and Helicon pedals. Other high current pedals, where a 200mA outlet is not adequate and a 400mA outlet should be used are: Electro-Harmonix 2880 or HOG, DigiTech Whammy 5 or DT, BOSS RC-300, Roger Linn Adrenalinn, Empress Effects Super or Tape Delay, T-Rex Room-Mate or Squeezer, FoxRox AquaVibe or MarkBass Distorsore just to mention some. A few pedals needing 9 or 12V but where 400mA is not enough can be powered using two 400mA outlets in a parallel connection using the Parallel adapter Flex. That could be the Boomerang, most of MarkBass pedals, BOSS GT-10 or RC-50. Some pedals need 18 or even 24V and a high current and in these cases you can use two 400mA in a series connection using the series adapter Flex and power pedals like original EHX Holier Grail, the POG or Flanger Hoax, Hiwatt tube pedals, all new DC versions of Blackstar dirt pedals like the HT-Dual or HT-Drive. A nice thing about the PowerFactor 2 are the two isolated medium current outlets 3 and 4. They yield 200mA each at voltages 9 or 12V. These two outlets are capable of powering pedals, where a standard 100mA outlet is not adequate, such as, most MoogerFoogers, many new Electro-Harmonix like the POG2, HOG 2, Cathedral, Ring Thing, Freeze or the older Holy Grail, all 4-botton Line6 modelers like the DL4, T-Rex Replica or Viper, BOSS double pedals like CE-20 or DD-20 or BOSS RC-30, ME-50 or ME-70, the big tc electronic Flashback X4 Delay and all Strymon pedals except the TimeLine and Mobius again to mention some. The first two outlets with 9 or 12V at 100mA can be used for all battery operated, standard 9V low current pedals. In case of digital pedals ex. the new TC Electronic TonePrint range like the Flashback Delay, Hall of Fame Reverb, Corona Chorus or the Ditto Looper, please use one outlet to power just one pedal. If you have some very low current dirt pedals like most overdrives or boosters, you can use Split Flex or the 3-way daisy chain to power two or three pedals using one single outlet.
Nem rendelhető
Jelenleg nem rendelhető
    Részletes leírás

    Nem rendelhető

    CIOKS Power Factor 2 tápelosztó specifikáció

    8 isolated outlets with 9 or 12V
    a total output current of 2.200mA
    toroidal transformer
    four high current outlets with 400mA each
    two medium current outlets with 200mA each
    two outlets for standard battery operated pedals
    short circuit protection of all outlets
    advanced LED monitoring of each outlet
    short circuit protection of all outlets
    advanced LED monitoring of each section
    120 or 230V mains voltage operation
    2m length, detachable mains power cord
    the more common IEC C14 inlet as mains AC input
    courtesy AC mains outlet
    CIOKS unique mains link feature
    a total of 14 Flex cables included
    very easy mounting to pedal boards
    durable steel enclosure with 2mm thick top
    Specifications:
    Outlet 1-2: 9 or 12V DC / 100mA each
    Outlet 3-4: 9 or 12V DC / 200mA each
    Outlet 5-6: 9 or 12V DC / 400mA each
    Outlet 7-8: 12V DC / 400mA each

    Size: 219x88x40mm (excl. rubber feet)
    Weight: 1,5kg

    Warranty period: 5 years worldwide

     

    Manufacturer
    SKU
    CIOKS-PF2

    Kiválasztott termékek

      Összehasonlítás

      Iratkozz fel hírlevelünkre!

      The subscriber's email address.
      Feliratkozásod
      Select the newsletter(s) to which you want to subscribe.