Ship worldwide

14 days money back warranty

Two Notes Opus Amp sim and DynIR Engine

INPUT / OUTPUT
Amp/Inst/Line Input: 1/4″ jack unbalanced (TRS)

Input Impedance:
AMP :160kΩ unbalanced / 300kΩ balanced
LINE : 37kΩ unbalanced / 55kΩ balanced
INST. : 1MΩ unbalanced

Max Level (No Input Pad):
AMP: 26.1dBu
LINE: 11.3dBu
INST.: 2.8dBu

Max Level (With Input Pad):
AMP: 36.2dBu
LINE: 20.8dBu
INST.: 12.3dBu

Max Admissible Power For Amplifier Connection:
“IN LEVEL” Switch Set To “AMP”

“TO SPEAKER” output connected to a speaker rated at 16Ω
No input pad: 15.2W
With input pad: 100W

“TO SPEAKER” output connected to a speaker rated at 8Ω
No input pad: 15.2W
With input pad: 100W

“TO SPEAKER” output connected to a speaker rated at 4Ω
No input pad: 60.5W
With input pad: 100W

Aux In:
1/8″ (3.5mm) TRS jack
Input Impedance: 29kΩ

TO SPEAKER Output*:
1/4″ Jack balanced (TS)
*Unprocessed, unbuffered

DI Output*:
XLR balanced
Max level: 10dBu
Output Impedance: 600Ω
*Protected against +48V phantom power

Line Output*:
XLR balanced
Max level: 10dBu
Output Impedance: 600Ω
*Not Protected against +48V phantom power

Headphone Output*:
1/8″ (3.5mm) TRS jack
Max output power: 300mW under 100Ω
Output impedance: 33Ω

USB Connector:
USB-C 2.0

Memory Card:
256Mb Micro-SD included Up to 32Gb cards supported

DIGITAL AUDIO
AD/DA Converters:
Studio-grade 24-bit / 96 kHz

Bandwidth (-1dB):
30 Hz – 19 kHz

Dynamic Range ratio:
101dB

Internal Processing:
32-bit floating-point

Latency:
2.2 ms (Line Input to Line Output)

POWER
Power input connector:

Connector: 2.1mm x 5.5mm
Polarity: Center negative
Voltage: 12V DC
Current: 200mA
Power consumption: approx. 2W

Supplied adapter:

Connector: 2.1mm x 5.5mm
Polarity: Center negative
Input Voltage: 100-240V AC , 50-60Hz
Output Voltage: 12Vdc
Max. Current: 2000 mA

DIMENSIONS AND WEIGHT
Width x Depth x Height*:
12.1cm x 10cm x 6cm – 4.8″ x 4″ x 2.4″
*Including connectors and knobs

Weight:
450 g / 0.99 lbs