TIME – Minimum position is perfect for vibrato and bright chorus, while mid position shifts the tone to a deep choral motion. At maximum position, beautiful modulated slap delay is achieved.
FEEDBACK - At low settings this control adds a slight resonance to the motion of a sound. At mid position, a more focused peak is created, and at maximum position with Time set to maximum - slap delay with beautiful echoes is achieved.

MIX – In the down position the chorus sound is open and natural. At middle position the sound becomes thick and warmth is increased. In the up position (Vibrato ) position, only the wet signal is heard.

DEPTH – Determines the amount of modulation applied to the delay time. As this control is increased, the motion transforms from subtle vibrato to chorus, and then into multi-octave time modulation.

RATE - Specifies the rate at which the LFO (Low Frequency Oscillator) modulates the analog delay time. Slower settings area ideal for large classic sweeps, while faster settings create spinning, rotary and film projector effects.

EXPRESSION PEDAL INPUT- This input is assigned to the Rate control. Use it to sweep from slow shifts to chopping musical extremes. With Rate set to maximum, audio rate modulation is possible.

MONO/STEREO SWITCH- To access both outputs (in bypass), you will need to remove the bottom of the MF Chorus and set this switch to Stereo. Then use a ¼” TRS to TS insert cable or TRS to TS splitter.

SIGNAL PATH: 100% Analog

BYPASS TYPE: True bypass

POWER: +9VDC WEIGHT: 18oz (0.5kg)

ENCLOSURE: Cast aluminum

DIMENSIONS: D=5.75” (14.4 cm) W=3.25” (8.3 cm) H=2.25” (5.8 cm)

DELAY TIME: <3.2mS – 60mS (2mS – 70mS with Modulation)

LFO RATE : <.05Hz - >13Hz (>25Hz With expression)

LFO SHAPE: Exponentiated Triangle

EXPRESSION: Controls Rate (Max Input level +5VDC)

INPUT IMPEDANCE: >1 MegaOhm

OUTPUT IMPEDANCE: 1000 Ohm

MAX INPUT LEVEL: +7.5dBμ

MAX OUTPUT LEVEL: +10dBμ CURRENT: 16mA Nominal / 20mA Max

OUTPUT STEREO: Left (Mono) = Dry + Wet / Right = Dry - Wet